Pages

Tuesday 12 December 2017

PTU Have a Beary Christmas PTU

Have a Beary Christmas
jennbearychristmas
This tutorial was written by me fairygem/Sharon on the 11th December 2017 and is all my own idea and creation. Any resemblance to other tutorials is purely coincidental and not intended. You will need to have a working knowledge of Paint Shop Pro for this tutorial.

You will need:-

Paint Shop Pro - I am using X5 but any version will work.
Scrap Kit - I am using a gorgeous kit by Jenn at Ginnibug Designz called Beary Christmas. You can buy this kit at Hania's Design HERE.
Tube of Choice - I am using a sexy tube by Keith Garvey called Elf. You can buy this tube at Keith's store HERE. Please remember that you need a working license to use Keith's Art.
Mask of Choice - I am using a lovely Christmas mask by Lori at Lori's PSP Graphics. The mask is called LLM-804 and can be downloaded HERE.
Font of Choice - I am using Shifty_Chica_2 which you can download HERE.
Image of Choice - I am using a winter image from SXC.HU which you can find in Google Search. Remember to put © on your tag so that people know where you got the image from.

Ok Open your tube in psp and Lets Begin:-

1. Open new image 650x650 transparent

2. Open Paper 2, Resize by 80%. Copy and Paste as a new layer. Layers load Mask and find the mask you are using. Delete Mask layer and merge group.

3. Open Element 82, resize by 70%. Copy and Paste as a new layer moving to the right. With your Pick Tool go to the top left corner of the frame. Press Shift and move the frame down by 2 squares. Now do the same with the bottom left part of the frame only move up by 2 squares. Make sure you keep your shift pressed when moving the frame. You window should now look like mine. Drop Shadow V4, H2, Opa 40, Blur 4.65 Black.
Window Screenshot

4. With your freehand tool draw around the window part of the frame. Expand by 6. Open your image and resize - I resize mine by 65%. Copy and Paste as a new layer placing what part of your image you would like to see. Invert and delete overhanging. Move under your frame layer.

5. Open Element 2, Resize by 80%. Copy and Paste as a new layer moving over to the right. Sharpen and D/S as above.

6. Open your Tube and if using the same as mine Resize by 85%. Copy and Paste as a new layer moving left. D/S as above.

7. Open Element 8, Resize by 40%. Copy and Paste as a new layer placing at top right side of frame. D/S as above.

8. Open Element 36, Resize by 75%. Copy and Paste as a new layer moving to top of frame. On layer palette move this under your tube and tree layer. D/S as above.

9. Open Element 42, Resize by 45%. Copy and Paste as a new layer moving next to the tube. On layer palette move under tube. D/S as above.

10. Open Element 11, Resize by 65%. Copy and Paste as a new layer moving slightly right. D/S as above.

11. Open Element 83, Resize by 60%. Copy and Paste as a new layer moving down and in front of tube. D/S as above.

12. Open Element 30, Resize by 35%. Image free rotate and rotate by 12 Right. Copy and paste as a new layer moving right. Duplicate and resize by 85%. Mirror and move slightly down. Merge Down and D/S as above.

13. Open Element 31, Resize by 25% then 55%. Free Rotate by 15% left. Copy and Paste as a new layer moving down. Duplicate and resize by 90%. Move slightly left. Merge down and D/S as above.

14. Add Copyright and License Details.

15. Add name using Shifty_Chica_2 and colour #8a0218 with stroke #1 and colour #00000.

Save as a PNG

Thats it we are done. I hope you enjoyed my tutorial and found it easy to follow. Any Questions or Queries please don't hesitate to get it touch. Remember though this is a guideline make the tag your tag with your own touches.
Hugs
fairygem/Sharon


 
 

Monday 11 December 2017

PTU Winter Baby PTU

Winter Baby
jennwinterbaby 
This tutorial was written by me Fairygem/Sharon on the 11th December 2017 and is all my own idea and creation. Any resemblance to other tutorials is purely coincidental and not intended. You will need to have a working knowledge of Paint Shop Pro and the program for this tutorial.
 
You will need:-
Paint Shop Pro - I am using X5 but any version will work.
Scrap Kit - I am using a gorgeous Winter kit by Jenn at Ginnibug Designz called Winter Baby. You can buy this kit at Hania's Designs HERE
Tube of choice -  I am using the cute tube Baby Seal by VeryMany which you can buy HERE. Please remember you need to have a license to use her artwork.
Mask of Choice - I am using a beautiful mask by Mille at MilliesPspMadness. The mask is called MPM_Mask101 and you can get it HERE
Font of Choice - I am using Scarlet Ribbon which you can get HERE 
 
Ok Lets Begin:-
 
1. Open New Image 650x650 Transparent
 
2. Open Paper 5 from your kit and resize by 85%, then Mirror. Copy and Paste as a new layer. Layers Load Mask and find the mask you are using. Delete mask layer and merge group.
 
3. Open Element 39, Resize by 45%. Copy and Paste as a new layer moving slightly up. Sharpen and Drop Shadow of V3, H3, Opa 35, Blur 3.85 Black.
 
4. Open Element 29, Mirror. Copy and Paste as a new layer moving slightly up. (You might need to move the church slightly higher so that its seen). D/S as above.
 
5. Open Element 3, Resize by 90% then Mirror. Copy and Paste as a new layer moving up and over to the left. D/S as above.
 
6. Open Element 5, Resize by 45%. Copy and Paste as a new layer moving over to the right. D/S as above.
 
7. Open Element 10, Resize by 75%. Copy and Paste as a new layer moving over to the Snowman. Duplicate and move slightly centre, Duplicate again, Mirror and move over to the left. On Layer Palette merge down twice.
 
8. Open Element 33, Resize UP by 120%. Copy and Paste as a new layer moving over to the left. Move Layer below Snow. D/S as above.
 
9. Go to Brushes and find a Sparkle Brush - If you don't have any you can find some stunners on Deviantart.com. Just type in Sparkle Brushes in the search engine. Add a new layer and with Foreground on White add a sparkle to each shade.
 
10. Open Element 83. Copy and Paste as a new layer moving over to the right.
 
11. Open your Tube and if using the same as me Resize by 45% then 85%. Copy and Paste as a new layer moving down and over to the left. D/S as above.
 
12. Add your Copyright and License details.
 
13. Add your name using Scarlet Ribbon font and colour #0352c3.
 
Save as a PNG
 
That's it we are done. I hope you enjoyed my tutorial and found it easy to follow. Remember though this is your tag so make it with your own wee touches. If you have any Questions or Queries don't hesitate to ask. I would love to see your results so please feel free to send me them and i will get them added
 
Hugs 
Fairygem/Sharon
 
 
 
 
 
 

Saturday 2 December 2017

PTU Santa Baby PTU

Santa Baby
JennSantaBaby
This tutorial was written by me Fairygem/Sharon on the 1st December 2017 and is all my own idea and creation. Any resemblance to other tutorial is purely coincidental and not intended.
For this tutorial you will need:-
Paint Shop Pro - I am using X5 but any version will work
Scrapkit of Choice - I am using a beautiful kit by Jenn at Ginnibug Designz called Santa's Sweetheart. You can buy this kit at Hania's Design HERE
Tube of Choice - I am using the wonderful artwork of Keith Garvey. The tube is called Noel and you can buy this at Keith's online shop HERE. Please remember if you are using the same tube you must have the proper license details.
Mask of Choice - I am using one of Vix's masks called Vix'sBigMask019. You can get this mask HERE
Font of Choice - I am using Bu Glenda which you can download HERE.
Plugins:-
Mura Miester - Copies
Ok lets begin:-
1. Open New Image 650x650 transparent
2. Open Paper 1, resize by 80%. Copy and Paste as a new layer. Load Mask and find your mask. Delete the Mask Layer and Merge Group.
 
3. Open Element 8 and resize up by 120%. Copy and Paste as a new layer. Drop Shadow V2, H3, Opa 30, Blur 6.75 Black.
4. Open Element 13, resize by 35% then 65%. Copy and Paste as a new layer. Effects Plugins Mura Miester Copies, Encircle with settings Below. Drop Shadow as Above.
muramiestercopiesSBaby
5. Go to Freehand Selection tool. Draw a circle round the Holly Frame, right click until you have the marching ants showing.
6. Open Paper 4, resize by 75%. Copy and Paste as a new layer moving the paper to where you would like it showing. Invert and Delete. Move your paper under both frames.

7. Open your Tube and if using the same as me resize the whole tube by 75%. Copy and Paste as a new layer moving over to the right. D/S as above.

8. Open Element 41, resize by 45% then 70%. Copy and Paste moving up and left. D/S as above.

9. Open Element 29, resize by 85%. Copy and paste as a new layer moving over to the left. On layer palette move this under your tube. Sharpen and D/S as above.

10. Open Element 50, resize by 45%. Copy and paste as a new layer moving down. D/S as above.

11. Open Element 64, resize by 45%. Copy and paste as a new layer moving down. Sharpen then D/S as above.

12. Open Element 66, resize by 45% then 70%. Copy and paste as a new layer moving down and left. Sharpen and D/S as above.

13. Open Element 12. Copy and Paste as a new layer moving left a wee bit.

14. Add your Copyright and License details.

15. Add your name using the font and colour #480607.

Save as a PNG.

That's it we are finished. 
I hope you enjoyed my tutorial and found it easy to follow, remember though this is just a guideline make your own personal touches to your tag.
I would love to see your results and add them to the post so please feel free to message me with your results.
Hugs 

Fairygem/Sharon